| Rated power | 1700 W |
| Warm-up time | 9.5 minutes (approx.) |
| Fluid flow rate | 240 ml/min (100% output) |
| Fluid tank capacity | 10 liters (2.64 gallons) |
| Compatible fluids | Antari FLG Fog Fluid, Antari FLR Fog Fluid, Antari FLH Fog Fluid |
| Ambient temperature | 0°C – 40°C (32°F – 104°F) |
| Control | Manual, Timer, DMX 512, Wireless (optional) |
| DMX Channels | 1 channel |
| Connections | Neutrik Powercon (Power), 3-pin and 5-pin XLR (DMX), Included |
| Accessories | Control Module: M-21 |
A fog hose with a diameter of 12 cm and a length of 10 meters. The DNG-100 Low fog cooler is equipped with one FT-10 for connection to the fog machine. This additional hose is needed to redirect the fog output from the DNG-100. With this additional hose, the fog can be dispersed anywhere within 10 m of the DNG-100. FOR USE WITH THE DNG-100 Low-Mist Generator
Fog-conducting hose adapter for the DNG-100. A hose splitter can be attached to it, allowing the low-pressure fog output to be split into two streams. FOR USE WITH THE DNG-100 Low-Mist Generator
This feature, identical to that of the FTA-1, is specifically designed for the Z-1500II and Z-3000II fogging machines .
This feature, identical to that of the FTA-1, is specifically designed for the Z-1000II, Z-1200II, Z-1000III, and Z-1200III fogging machines.
Adapter for connecting the FT-10 fog hose to the M-5, M-8, M-10, W-510, W-515D, W-530D, IP-1000, IP-1500, IP-1600, IP-3000, Z-1500III, Z-3000III, and M-12 fog generators to achieve strategic fog deployment.
FEATURES The M-31 wireless control module, as the name suggests, adds wireless control to your M-8 machine. The M-31 provides reliable radio frequency technology. You get the flexibility of wireless technology and the functionality you expect from Antari. CABLE LENGTH 2M OPERATING RANGE Wireless, up to 50M CONNECTOR 5-pin XLR FEATURE Two radio frequencies are available for the W-1 wireless transmitter. They are 315 MHz and 433 MHz, respectively. COMPATIBLE WITH M-8 Fog Machine
CABLE LENGTH: 2 M CONNECTOR 5-pin XLR FUNCTIONS : Interval timer, duration, and volume control; DMX address setting; manual on/off. (All of the above functions are displayed on the LCD screen) COMPATIBLE WITH M-8 Fog Machine
Features: The Antari C-300 is designed to maintain the maximum performance of your effects machine. Regular use of this specially formulated solution will keep the pump in optimal condition. Use this solution for maintenance before storage to prevent the pump from drying out and becoming clogged. Available in the following sizes: 300 ml
Features: Water-based DEG-free (Diethylene Glycol) Delivers optimal results Formulated with the highest purity standards Made in Taiwan CLP Regulation Information: Antari Fog and Haze Fluid do not contain any of the listed ingredients All ingredients used in Antari fluid are harmless Antari products are not subject to the CLP Regulation
Features: Water-based DEG-free (Diethylene Glycol) Delivers optimal results Formulated with the highest purity standards Made in Taiwan CLP Regulation Information: Antari Fog and Haze Fluid do not contain any of the listed ingredients All ingredients used in Antari fluid are harmless Antari products are not subject to the CLP Regulation
Features: Water-based DEG-free (Diethylene Glycol) Delivers optimal results Formulated with the highest purity standards Made in Taiwan CLP Regulation Information: Antari Fog and Haze Fluid do not contain any of the listed ingredients All ingredients used in Antari fluid are harmless Antari products are not subject to the CLP Regulation
You can now use this new LCU-2S fluid supply kit with all Antari foggers, haze machines, and snow machines, regardless of the model type. This significantly expands its range of applications. It can simultaneously supply up to 3 different machines if the same fluid is used. A more sophisticated design with a simpler electronic layout significantly increases overall reliability and makes operation as easy as possible. Just turn it on, the fluid tank unit will always be full, and you’re all set. The vertical distance between the fluid tank unit and the fluid supply unit can be up to 12 meters, and the horizontal distance up to 35 meters.
The latest LCU-1S is equipped with an LCD panel, allowing users to read and easily configure settings. The LCU-1S is pre-programmed for use with the Z-1200II, S-100X, S-200X, and SW-250; the flow rate is adjustable to dispense one unit at a time. An additional “Null” mode offers versatility for use with any model by running the pump at 100% power; allowing it to dispense a maximum of 4 units at a time. The LCU-1S can deliver fluid up to 35 meters in length or a maximum of 25 meters in height, designed for most remote fluid applications.
The AF 6 is a more powerful and high-performance fan designed to deliver maximum impact. With its increased airflow, it enables you to create more dynamic and impressive effects, taking your shows and performances to the next level. It is a versatile solution that opens up new possibilities for creating stage effects. Equipped with an LED display and tactile buttons, the device offers convenient control and flexibility in use. Its design, featuring an adjustable tilt angle of up to 180 degrees, allows you to precisely adjust the airflow direction to achieve the desired result.
The Antari AF 10 is a high-speed fan designed for professional use, combining power, precision, and reliability. Thanks to its unique spiral-shaped front grille, it delivers a focused airflow while reducing turbulence and noise levels. Specially designed aerodynamic blades ensure optimal air distribution with minimal noise, making it ideal for use on stage, in studios, and in installations.
The Antari AF 14 is a high-speed fan designed for professional use, combining power, precision, and durability. Thanks to its IP55-rated splash-proof design, it operates reliably in challenging environments involving moisture, dust, or open-air conditions, making it the ideal choice for touring, stage productions, and permanent installations.
